How to Install Sash Windows in Northern Ireland

3 minutes, 55 seconds Read

Are you planning to install new windows in Northern Ireland? I know that the installation of any window is a complex job that most people without some experience in building and joinery may have difficulty doing, so shouldn’t be taken lightly. 

To explain, sash windows guide the method of replacing all parts of windows – both the window sashes and the box framing. 

If you are planning to replace some new windows in Northern Ireland with more energy-efficient glazing can be quite useful in the long term. You are in the right post that you should know more about how to install sash windows. 

Understanding – Sash Windows

Did you know that the term ‘sash window’ mainly describes any window that doesn’t open on a hinge? There is no outward swing. Instead, for fresh air, sash windows either slide vertically or horizontally, but traditionally, most open vertically.

Both sashes are situated in vertical grooves, and they are offset with weights connected with a sash cord hidden in the frame. These are known as double-hung windows. The windows are easy to open, but they also stay in the place where you set them thanks to their completely balanced weights. Sash windows can be spread at the bottom or top, or both.

Fun Facts: 

  • Do you know that these windows are mainly designed to be airtight to prevent air leaks and drafts around the window? 
  • As sash windows were originally invented and used in France.
  • Sash windows do not require regular maintenance.

Benefits You May Get 

Are you considering a home improvement project or looking to replace your old windows? If so, you might now want to take a closer look at sash windows. 

In this post, let’s discuss the benefits that you may get from sash windows:

  • They Look Good

There’s quite like a sash window when it comes to formations. They can add a traditional touch that’ll elevate certain properties, and pay for themselves by adding value to the building.

At the same time, the sash window is relatively versatile, considering its traditional style. Whether it’s a classic country home or a stylish flat, a sash window is nearly guaranteed to please.

  • They’re Safe & Secure

Sash window safety is another reason to prefer them. Given that just one panel can be spread at a time, they’re a ton harder to climb through than traditional windows. It’s also comfortable to comprise extra safety components like locks and child safety devices.

  • They’re Low-Maintenance

Like their belt matches, aluminium and sash windows need hardly any maintenance. The one-time maintenance is powder-coated at the factory level, while the latter is inherently white and not designed to be interfered with at all. 

How To Install

If you are wondering how to install new windows in Northern Ireland? Or are you planning for your home improvement project? 

Do you know that these sash windows are a timeless and elegant choice? And these have a lot more to offer than just their classic appearance. 

Let’s learn how to install sash windows: 

  • Measure the existing frame

Firstly, the inside edge of the window side jamb, and measured straight across to the opposite jamb. This number is your width. Now, measure from the sill up to the head jamb. This number is your height. 

To ensure that you order the correct window sash replacement kit, refer to the manufacturer’s instructions on how to order based on these measures.

  • Remove the old sashes

Then you need to start by poking off (or unscrewing) the window stops on the left and right side of the sash window. 

The window stops may be sealed to the trim, so it is best to score the joint first with a utility knife or putty knife. 

  • Install the jamb liners

This follows the manufacturer’s placement recommendations, install the liner clips. One is typically required about 4 inches down from the head jamb and 4 inches up from the sill, then a number of them in between depending upon the height of your window jamb. 

  • Install the sashes

Starting with the top sash, weave it into the beginning engaging the lower pin into the metal cam in the liner. Then gradually lower the other side until its pin encounters the metal cam on the other side. 

Once it snaps into position, push the window up. Repeat the process for the lower belt. Lock the window.

Wrap Up

So, what are you waiting for? Install sash windows in your space today! And make sure you choose the best manufacturer and experts to install it in your space! 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *